Download: | BMS PCBA |
---|---|
Electricity: | 30A |
Voltage: | 60V |
Application: | Electronic Products |
Usage: | Li Ion Lipo Battery Pack |
Testing: | 100%Testing |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
TP20S001
TP20S001 is an intelligent protection board scheme specially designed for 16 ~ 20 series battery pack of electric bicycle and electric motorcycle. It is suitable for lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc.The protection board has strong load carrying capacity and the maximum continuous discharge current can reach 50A.
1.16-20 cell series protection
2.Various protection functions for charging and discharging
3.Hardware discharge over - current, short - circuit protection function processing
4.Temperature protection function
5.Very low static consumption current
6.No charging function for single section less than 1.2V
7.Drop protection function
8.Discharge switch function (reserved)
Operating voltage range | 47.6-72V |
Operating current MAX | 20/30A |
Over-charge protection voltage | 4.25±0.05V |
Over-discharge protection voltage | 2.8±0.1V |
Balanced turn-on voltage | 4.15±0.05V |
Charging over current protection value | 26±6A |
High temperature protection value of charging | 85±8ºC(built in) |
High temperature protection value of discharge | 90±8ºC(built in) |
Internal resistance | <20mΩ |
1. What type of charger should I choose?
Lithium battery must choose specific charger, do not use Charger for Leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge. Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X4.2V.
2.The relationship between Battery capacity and BMS current?
There is no direct relationship between Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say if your engine is powerful, your should choose high current of BMS, it is not relied on batterycapacity.
3.Whether my BMS damaged?
If you want to judge if the BMS is damaged, please take the folowing steps, to test if each cell voltage is the same with
voltmeter? if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the
start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displyed as no charge, no discharge, no discharge while the battery has voltage.
Suppliers with verified business licenses