| Download: | BMS PCBA |
|---|---|
| Copper Thickness: | 5 Oz |
| Electricity: | 30A |
| Voltage: | 24V/36V/48V/60V |
| Application: | Electronic Products |
| Usage: | Lithium Battery Packs |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier HP16SA
HP16SA is the hardware BMS which designed for battery packs of the inverter, the electric bicycles and the electric motorcycles of batter packs.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current can reach 30A.
1.7-16 cell series protection
2.Various protection functions for charging and discharging
3.short circuit protection functional processes of hardware
4.reserves the discharging control switch and the position of discharging temperature protection,
5.Very low static current consumption
6.Containing charging equalization function
7.Discharge overcurrent, short circuit protection functional processes of hardware
Application
| Battery Series | Battery Rated Voltage | Battery Series | Battery Rated Voltage |
| 70 | 3.6V/3.7V(24V) | 8 | 3.2V(24V) |
| 10 | 3.6V/3.7V(36V) | 12 | 3.2V(36V) |
| 13 | 3.6V/3.7V(48V) | 14 | 3.6V/3.7V(48V) |
| 16 | 3.6V/3.7V(60V)/3.2V(48V) | ||
1. What type of charger should I choose?
Lithium battery must choose specific charger, do not use Charger for Leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge. Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X4.2V.
2.The relationship between Battery capacity and BMS current?
There is no direct relationship between Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say if your engine is powerful, your should choose high current of BMS, it is not relied on batterycapacity.
3.Whether my BMS damaged?
If you want to judge if the BMS is damaged, please take the folowing steps, to test if each cell voltage is the same with
voltmeter? if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the
start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displyed as no charge, no discharge, no discharge while the battery has voltage.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}